- Flat blade wishbone 130x30x4 SB (20°) reverse tip bevel (0,5mm 20°) LH with part no. 11ST.02.0051.1 -
- Flat blade wishbone 130x30x4 SB (20°) reverse tip bevel (0,5mm 20°) RH with part no. 11ST.02.0052.1
- Meyn compatible spare parts
- Bearings for Meyn
- Torsion Springs
- Killing / plucking
- Aluminium Bearinghousing (new type)
- Aluminium Pickerhousing
- Bearing 6207
- Bearing 30304
- Bearing housing
- C-clip
- C-clip type 2
- Complete Bearinghouse
- Fingerdisc Pulley D=150x65 bore 16
- Grease Fitting
- Key for Spacer
- KM 4 lock nut S.S.
- MB 4 Locking Ring
- Meyn Heavy Duty
- Oil Seal 20x52x7
- Oil Seal TC-125x2.83x375
- Picker Belt 4130mm x 60mm
- Picker Belt 5050mm x 60mm
- Pickerdisk
- Pressure Release Plug
- S.S. Filling Ring
- S.S. Fingerplate Holder (hub) 12 holes
- S.S. Shaft
- S.S. Shaft new type
- Picking Fingers for Meyn pluckers
- Unloader / Hock Unloader / Foot Unloader
- Airvalve 5/2 1/4''
- Evisceration
- Weighing / classification
- Cut-up
- Deboning
- Overhead conveyor
- Used control panels
- Stork compatible spare parts
- Systemate compatible spare parts
- Linco compatible spare parts
- Killing / plucking
- 50 Tooth Bevel Left Gear
- 50 Tooth Bevel Right Gear
- Aluminium Housing
- Aluminium Spacer
- Bearing
- C-clips
- Distance Ring
- Fingerdisc Plugs
- Finger Disc for Linco heavy duty
- Flange Gear 50 Tooth
- Housing Plate for Linco heavy duty
- Heavy Duty Plugs
- Left 6 Hole Finger Plate
- Left Gear 50 Tooth
- Linco Heavy Duty Bearinghouse
- Linco style complete Long Shaft
- Linco style complete Short Shaft
- Motor Gear
- Oil Seal 30x47x10
- Plastic Drip Cap
- Right 6 Hole Finger Plate
- Right Gear 50 Tooth
- S.S. Long Parallel Keys
- S.S. Long Shaft
- S.S. Short Parallel Keys
- Washer
- Evisceration
- Overhead Conveyor
- Shackles
- Killing / plucking
- Universal Spare Parts
- Overhead conveyor
- Emergency spares
Flat blade wishbone
Flat blade arrow head
- Flat blade arrow head 140x55x4 SB (30°) with part no. 11ST.02.0040.1
- Flat blade arrow head 138,2x56x4 SB (20°) - special with part no. 11ST.02.0041.1
- Flat blade arrow head 140x30x4 SB with part no. 11ST.02.0042.1
Flat blade 140x100x4
- Flat blade 145x100x4 SB (15°) RH with part no. 11ST.02.0047.1
- Flat blade 145x100x4 SB (15°) LH with part no. 11ST.02.0048.1
Flat blade 80,2 x 31 x 2,5
- Flat blade 90x31/21,85x2,5 SB (30°) with part no. 11ST.02.0053.1
Flat blade 90 x 31/21,85 x 2,5
- Flat blade 80,2x31x2,5 SB (30°) LH with part no. 11ST.02.0045.1
- Flat blade 80,2x31x2,5 SB (30°) RH with part no. 11ST.02.0046.1
Flat blades compatible with Stork
Details
| brand: | Stork |
| units: | various shapes and sizes |
| current state: | New |